LEAD EDGE FEEDER

-Bottom wheel-type suction box, equipped with air blower and automatic damper, to make the air volume adjustable by frequency converter;

-Movable back gauge with up and down adjustable sheet supporting plate;

-Rear jogger at feeder in preparation for future in line with prefeeder (Optional);

-Pneumatic side push guide plates (left and right sides);

-Left and right hand side guides with separating and synchronizing adjustment available;

-Front guide plate with back and forth, up and down micro-adjustments;

-Automatic pushing frame (Optional);

DIE-CUTTING SECTION

-High strength die-cutting frame;

-High precision mobile platen and driver;

-Die-cutting station safety door plus electrical and mechanical safety system;

-Die chase positioning and automatic locking system, centerline system making the cutting die and stripping die centered quickly and precisely;

-Synthetic supporting plate positioning and safety locking system, cutting plate micro-adjustment system;

-Pneumatic clutch/break and safety control system;

-Motorized pressure adjustment system and indication of die cutting pressure by means of digital read out;

-Gripper bar and driving chain;

-Gripper bar chain safety locking device;

-Gripper bar chain guide rails are made of synthetic materials;

-High quality index unit and gears for gripper bars;

-Overloading protection torque limit system for gripper bars and chains;

-Photo sensor detection system when gripper bar and sheets arrive and depart;

-Left and right front lay locking blocks, separate adjustments available;

-Automatic forced lubrication system recycles fluid and is equipped with oil gauge and interruption alarm;

-Automatic main drive chain lubrication;

-Pneumatic die-cutting plate locking device.

STRIPPING SECTION

-Center line system for quick upper and middle stripping die set up and change over;

-Fully open-type upper stripping frame, and front/back micro-adjustment system for upper stripping tools;

-Lower stripping frame mechanism with center line system for quick lower stripping die set up and change over (Optional);

-Push button of gripper opening is added for easy taking out the production sample at stripping section;

-Lower stripping pin system (Optional);

-Front edge waste removal system and center line system for quick setup and changeover of front edge waste stripping tool;

-Full stripping with/without lead edge waste stripping convertible by one button, no tool change, more operator friendly and safe operation;

-Safety door at stripping station; electrical and mechanical safety system.

DELIVERY SECTION

-Conveyor belt type delivery table;

-Conveyor belt bundle delivery table can be prepared for future connection with breaker for automatic in line operation;

-Non-stop auxiliary delivery table;

-Batch delivery conveying control system;

-Electrical batch counter;

-Front jogger device;

-Motorized side joggers with side sheet supporting device;

-Motorized delivery back gauge and sheet tail supporting device;

-Safety door at delivery section; electrical and mechanical safety system.

DELIVERY SECTION

-Conveyor belt type delivery table;

-Conveyor belt bundle delivery table can be prepared for future connection with breaker for automatic in line operation;

-Non-stop auxiliary delivery table;

-Batch delivery conveying control system;

-Electrical batch counter;

-Front jogger device;

-Motorized side joggers with side sheet supporting device;

-Motorized delivery back gauge and sheet tail supporting device;

-Safety door at delivery section; electrical and mechanical safety system.